RewriteEngine On RewriteBase / RewriteRule ^index.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . index.php [L] How to Remove Mold from Bathroom Ceiling – 6 Easy Steps

How to Remove Mold from Bathroom Ceiling – 6 Easy Steps

One of the most prevalent areas of your home where mold can easily grow and thrive is the bathroom. Mold tends to flourish in moist and humid areas, and the shower is a prime breeding zone due to frequent use of hot water.

Some of the primary causes of bathroom ceiling mold include:

  • Lingering moisture resulting from poor air circulation
  • Low levels of natural light
  • Warm temperature of the room
  • Leaky plumbing pipes, sinks, and toilets
  • Damp cellulose materials like wallpaper, rugs, drywall, grout, fabric, and more

It is important to kill the mold on a bathroom ceiling as soon as it develops in order to keep your bathroom safe, clean, and healthy. Unsightly bathroom ceiling mold does not only pose a health hazard for you, but it can also result in permanent damage to your home. Some mold spores have been linked to the escalating risks of serious health issues.

For this reason, you need to learn how to get rid of mold on bathroom ceiling and prevent it from coming back so as to eliminate the chances of unnecessary health problems. Today, we will be focusing on how to clean mold off bathroom ceiling and avoid them from causing any permanent damage to your home. Below are a few easy steps you need to follow in treating on bathroom ceiling.

Supplies Needed:

  • Pair of rubber gloves
  • Bucket
  • Scrubbing sponge
  • Laundry soap
  • Disposable stirring stick
  • Bleach
  • Hot water
  • Towel
  • Stepladder or footstool
  • Fan

how to clean mold off bathroom ceiling

Step One: Carefully identify the signs of mold problems

Carefully take a look at your bathroom ceiling to find out whether there are any black, brown, orange, or green spots. Mold spots can occur in a range of sizes from minute specks to sizeable clusters.

These spots can either accumulate on a specific area with concentrated water damage or spread out over a large portion of the ceiling. Other signs of mold problems include weird discoloration, peeling paint, recurrent black streaks, and a musty smell.

Step Two: Prepare the mold removing solution

Upon discovering the signs of mold problems, you need to quickly act to resolve the cause of the mold. Getting rid of mold promptly helps prevent any adverse health effects as well as permanent damage to your home. Make sure to wear your rubber gloves before getting to work in order to protect your hands from both the mold and the cleaning solution.

Fill a bucket with 1/3 cup laundry soap, ½ cup of bleach, and 1 gallon of hot water. Mix these ingredients with a disposable stick, making sure the liquid never spills out of the bucket. Remember that while the bleach can effectively kill the mold, it can also accidentally destroy nearby items.

Step Three: Find a secure way to get access to the bathroom ceiling mold

Sometimes reaching the mold is a daunting task. You will need to use a sturdy tool meant for standing on, such as a stepladder or footstool.

It would be helpful to use a tool with rubber or non-slip feet to cushion against slips. Using a tool with non-sleep feet could increase the chances of accidents, especially if you are dealing with very slippery floors like tiles.

Step Four: Get rid of the mold

Before you start this process, make sure to open any bathroom window and door to cut down the intensity of the fumes. Dip the scrubbing sponge in the mold removing solution, and then carefully scrub the mold affected area of your ceiling. Apply the back-and-forth strokes when rubbing so as to shift the mold off.

As you work, keep immersing the scrubbing sponge in the solution. However, try not to overdo it because excessive cleaning solution could lead to dripping. And dripping could end up damaging your clothing or even unprotected skin with the cleaning agent.

You can take breaks after a couple of minutes, especially if you are cleaning a large patch of mold. Keep checking if there are any residual spots on the bathroom ceiling. And if you can still see some mold spots, continue the treatment process until you no longer see any more spots.

Step Five: Rinse the ceiling and allow it to dry

Have the scrubbing sponge squeezed and empty the bucket containing the mold cleaning solution into the sink. Fill the bucket with cool water and clean it together with the scrubbing sponge. Refill the bucket once more with water and dip the sponge in it to rinse.

Now climb up the footstool again and rinse the bathroom ceiling using a clean towel and water. If you have a fan, switch it on to circulate the air in the bathroom for about a half an hour. Alternatively, you can open the window to allow the breeze in, especially if the day is warm.

Step Six: Prevent mold from returning

As we stated earlier, mold spores thrive in damp, dark, and isolated spaces. Getting rid of mold on bathroom ceiling is great, but the mold is likely to return if you fail to control the conditions leading to mold development. Bathtubs and showers generate steam that ascends up the ceiling and settles there if the bathroom is poorly ventilated.

To prevent mold spores from returning, it is vital to improve the ventilation in your bathroom by opening doors and windows to increase air flow. If you have no window in your bathroom, you can install a bathroom ceiling fan or room vent to cut down moisture in the room. Finally, consider covering the entire bathroom ceiling with a mold-resistant or waterproof paint to protect against mold growth in the future.

5/5 - (3 votes)

Leave a Reply