Keeping your toilet clean and sparkling can be a challenging task, especially if you use hard water in your home. Hard water contains a lot of mineral deposits including limescale, magnesium, and much more. The high level of mineral deposits in your water normally appears as a dull and white film that might be difficult to remove.
Hard water can be particularly bad for your toilet because it tends to hold some standing water. To make the best toilet cleaning recipes for hard water stains, you will require the following ingredients and tools.
- White vinegar
- Borax
- Baking soda
- Lemon essential oil
- Lavender essential oil
- Paper towels and rags
- Toilet brush and plunger
- Spray bottle
- A pair of gloves
Table of Contents
How to remove hard water stains from toilet bowl
When you are planning to remove some hard water stains from your toilet bowls, it is vital to pay attention to the ingredients you use. There is no need to utilize harsh chemicals because you can safely eliminate hard water stains from your toilet with several common and readily available products. Here are the tried and tested solutions on how to remove hard water stains from toilet bowl naturally.
1. White vinegar and baking soda recipe
Vinegar and baking soda are two of the most beneficial products that you can use to clean a lot of things in your home, including tough hard water stains in your toilet bowls. Besides, these two ingredients are inexpensive, which means you don’t have to spend a lot of money to get these items.
Procedure
- Pour approximately one cup of white vinegar into your toilet bowl and whiz it around using a brush. Allow it to sit for around one or two minutes.
- Add a cup of baking soda to your toilet bowl, and then add another one or two cups of white vinegar. That will automatically create a bubbling action. Allow the solution to sit for around ten minutes.
- Using a toilet brush, swish the mixture around the toilet bowl to make sure it gets onto the stains beyond the waterline.
- Allow the baking soda and vinegar solution to sit again for approximately 30 minutes, swishing severally until all the stains disappear. If you still can see some remaining stains, scrub them using a stiff-bristled nylon brush or a toilet brush, and then flush your toilet to rinse.
2. White vinegar and borax
Borax is a natural mineral which greatly resembles baking soda. It is generally a powerful multi-purpose cleaning item that you can effectively use to clean and remove any hard water stains from your porcelain toilet and any other plumbing fixtures in your home. This cleaning product works by loosening the accumulation of grime in your toilet bowls and sinks.
Procedure
- Pour one cup of Borax solution into your toilet bowl and then swish it around using a toilet brush. Do not flush your toilet at this stage.
- Add one cup of white vinegar and let the mixture sit in the toilet for around 20 minutes.
- Scrub your toilet bowl using a toilet brush to get rid of the stubborn stains and then flush your toilet to rinse.
3. Borax paste
If your toilet has some stubborn stains, you can try making a borax paste to deal with the stains. This powerful compound works pretty well to clean any problem areas around the house naturally.
Procedure
- Shut off the water to your toilet at the shutoff valve and then flush your toilet to drain water from the bowl. By doing this, you will ensure that no hard water stains are covered by water.
- Make some borax paste by mixing a half cup of Borax with enough white vinegar to create a thick paste. Borax usually hardens fast, so do not add the white vinegar until you’re ready to clean the toilet.
- You can spread the borax paste instantly onto the toilet stains and ensure the paste completely covers them.
- Let the paste sit for around 15 to 20 minutes.
- Remove the stains and paste by scrubbing your toilet using a stiff-bristled nylon brush, and then flush your toilet to rinse.
Conclusion
Hard water can build up fast on toilets and with time can leave tough stains that are pretty unsightly and extremely hard to remove. There’s no need to use costly and harsh chemicals to get rid of hard water stains from your toilet. Borax, baking soda, and white vinegar do an excellent job of disinfecting and cleaning.
